Scan-Speak Revelator 26W/8861T00

• Sensitivity (1W, 1m, infinite baffle) SPL1W 88.4dB
• Frequency response 19 - 1500Hz

Thiele & Small parameters

• Resonance frequency (free air) fS 19Hz
• Mechanical quality factor QMS 5.20
• Electrical quality factor QES 0.33
• Total quality factor QTS 0.31

Large signal parameters

• Maximum linear excursion xmax 9mm
• Maximum excursion before damage xlim 14mm
• Air volume displaced at xmax VD 288cm³
• Power handling P 80W
• Program power Pmax 200W

Voice Coil

• Nominal impedance Z 8Ω
• DC resistance RE 6.2Ω
• Inductance (1kHz, estimated) LE 0.85mH
• VC Diameter 50mm
• Winding height HVC 24mm

Magnet

• Force factor Bl 9.9N/A
• Motor constant Bl/√RE 3.98N/√W
• Air gap height HAG 6mm
• Material Ferrite

Diaphragm

• Effective diameter 202mm
• Effective area SD 320cm²
• Moving mass MMS 43.5g
• Moving mass (without air load) MMD 39.2g
• Material Rigid Paper

Suspensions

• Stiffness KMS 0.621N/mm
• Compliance CMS 1610µm/N
• Equivalent volume to the compliance VAS 231L
• Mechanical resistance RMS 1N·s/m
• Surround material SBR Rubber

Dimensions

• Nominal diameter 10″
• 260mm
• Volume occupied by the driver 1.31L
• Net weight 3.7kg
• Frame material Die cast Aluminium