Skar Audio VD-10 D2
2x2Ω
2x4ΩShallow Subwoofer
| Nominal diameter | 10″ / 271 mm |
| Resonance | 42 Hz |
| Q factor | 0.47 |
| Sensitivity | 85.2 dB |
| Linear excursion | ± 11.5 mm |
| Program Power | 800 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 85.2dB
Thiele & Small parameters
- Resonance frequency (free air) fS 42Hz
- Mechanical quality factor QMS 4.55
- Electrical quality factor QES 0.53
- Total quality factor QTS 0.47
Large signal parameters
- Maximum linear excursion (one way) xmax 11.5mm
- Air volume displaced at xmax VD 375cm³
- Power handling P 500W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.5Ω
- Inductance (1kHz, in series, estimated) LE 2.12mH
- VC Diameter 50.8mm
- Winding material Copper
Magnet
- Force factor (in series) Bl 15.8N/A
- Motor constant Bl/√RE 8.45N/√W
- Diameter 152mm
Diaphragm
- Effective diameter 204mm
- Effective area SD 326cm²
- Moving mass MMS 144g
- Moving mass (without air load) MMD 139g
- Material Pressed Paper
Suspensions
- Stiffness KMS 10N/mm
- Compliance CMS 100µm/N
- Equivalent volume to the compliance VAS 15.1L
- Mechanical resistance RMS 8.33N·s/m
- Surround material Foam
Dimensions
- Nominal diameter 10″
- 271mm
- Overall diameter 271mm
- Baffle cutout diameter 237mm
- Overall depth 140mm
- Flange thickness 26mm
- Mounting depth 114mm
- Volume occupied by the driver (estimated) 1.9L
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.webp.webp)