Tang Band W46-1316N

Subwoofer

Nominal size4x6″ / 102x152 mm
Resonance50 Hz
Q factor0.46
Sensitivity85.5 dB
Linear excursion± 5 mm
Program Power60 W
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
Discard
Apply
  • Sensitivity (1W, 1m, infinite baffle) SPL1W 85.5dB
  • Frequency response 50 - 2000Hz

Thiele & Small parameters

  • Resonance frequency (free air) fS 50Hz
  • Mechanical quality factor QMS 4.07
  • Electrical quality factor QES 0.52
  • Total quality factor QTS 0.46

Large signal parameters

  • Maximum linear excursion xmax 5mm
  • Air volume displaced at xmax VD 47cm³
  • Power handling P 30W
  • Program power Pmax 60W

Voice Coil

  • Nominal impedance Z 4Ω
  • DC resistance RE 3.2Ω
  • Inductance (1kHz) LE 0.017mH
  • VC Diameter 32mm

Magnet

  • Force factor Bl 5.73N/A
  • Motor constant Bl/√RE 3.2N/√W
  • Air gap height HAG 5mm
  • Material Ferrite

Diaphragm

  • Effective diameter 109mm
  • Effective area SD 93.5cm²
  • Moving mass MMS 15.4g
  • Moving mass (without air load) MMD 14.9g
  • Material Polypropylene

Suspensions

  • Stiffness KMS 1.82N/mm
  • Compliance CMS 550µm/N
  • Equivalent volume to the compliance VAS 6.83L
  • Mechanical resistance RMS 1.19N·s/m
  • Surround material Rubber

Dimensions

  • Nominal size 4 x 6
  • 102 x 152mm
  • Volume occupied by the driver (estimated) 0.48L
  • Net weight 1.2kg
Tang Band W46-1316N SPL & Impedance
Tang Band W46-1316N Dimensions

Similar subwoofers to Tang Band W46-1316N

Fountek FW135H Mid-range

Fountek FW135H

8 Ω
5.25 Mid-range
fS59.1 Hz
SD86.6 cm²
70 - 5500 Hz
QTS0.46
xmax5 mm
SPL1W85.5 dB
Bl/√RE2.68
Pmax60 W
Morel HYBRID MW 5 Woofer

Morel HYBRID MW 5

4 Ω
5 Woofer
fS56 Hz
SD90 cm²
45 - 3000 Hz
QTS0.45
xmax3.5 mm
SPL1W86 dB
Bl/√RE2.42
Pmax240 W
Dayton Audio DSA135-8 Woofer

Dayton Audio DSA135-8

8 Ω
5 Woofer
fS51.8 Hz
SD75.4 cm²
51 - 9000 Hz
QTS0.38
xmax4.9 mm
SPL1W85.3 dB
Bl/√RE2.56
Pmax100 W