Full-range
5″ / 127 mm
Nominal diameter
60 Hz
Resonance
0.44
Q factor
91 dB
Sensitivity
± 3 mm
Linear excursion
56 W
Program Power
![Tang Band W5-1611SA Full-range](/TangBand/W5-1611SA/TangBand_W5-1611SA_(Photo_1).png)
![Tang Band W5-1611SA Full-range](/TangBand/W5-1611SA/TangBand_W5-1611SA_(Photo_2).png)
![Tang Band W5-1611SA Full-range](/TangBand/W5-1611SA/TangBand_W5-1611SA_(Photo_3).png)
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 90.7
- dB
- Frequency response
- 60 - 20000
- Hz
- Resonance frequency (free air)
- fS
- 60.0
- Hz
- Mechanical quality factor
- QMS
- 1.67
- Electrical quality factor
- QES
- 0.60
- Total quality factor
- QTS
- 0.44
- Maximum linear excursion
- xmax
- 3.0
- mm
- Air volume displaced at xmax
- VD
- 28
- cm³
- Power handling
- P
- 28
- W
- Program power
- Pmax
- 56
- W
- Nominal impedance
- Z
- 8
- Ω
- DC resistance
- RE
- 6.8
- Ω
- Inductance (1kHz)
- LE
- 0.01
- mH
- VC Diameter
- 25
- mm
- Force factor
- Bl
- 5.18
- N/A
- Motor constant
- Bl/√RE
- 1.99
- N/√W
- Air gap height
- HAG
- 10
- mm
- Material
- Neodymium
- Effective diameter
- 109
- mm
- Effective area
- SD
- 94
- cm²
- Moving mass
- MMS
- 5.8
- g
- Moving mass (without air load)
- MMD
- 5.1
- g
- Material
- Black color Polypropylene
- Stiffness
- KMS
- 0.96
- N/mm
- Compliance
- CMS
- 1037
- µm/N
- Equivalent volume to the compliance
- VAS
- 13
- L
- Mechanical resistance
- RMS
- 1.3
- N·s/m
- Surround material
- Rubber
- Nominal diameter
- 5
- ″
- 127
- mm
- Volume occupied by the driver (estimated)
- 0.39
- L
- Net weight
- 0.98
- kg
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![Tang Band W5-1611SA SPL & Impedance](/TangBand/W5-1611SA/TangBand_W5-1611SA_(Frequency_response_+_Impedance).png)
![Tang Band W5-1611SA Dimensions](/TangBand/W5-1611SA/TangBand_W5-1611SA_(Dimensions).png)
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)