VISATON R 10 S - 4 Ohm
4Ω
8ΩFull-range
Nominal diameter | 4″ / 100 mm |
Resonance | 160 Hz |
Q factor | 1.45 |
Sensitivity | 92.6 dB |
Linear excursion | ± 0.5 mm |
Program Power | 30 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.6dB
- Frequency response 100 - 13000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 160Hz
- Mechanical quality factor QMS 5.53
- Electrical quality factor QES 1.96
- Total quality factor QTS 1.45
Large signal parameters
- Maximum linear excursion xmax 0.5mm
- Maximum excursion before damage xlim 1.5mm
- Air volume displaced at xmax VD 2.8cm³
- Power handling P 20W
- Program power Pmax 30W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz) LE 0.2mH
- VC Diameter 15mm
- Winding height HVC 4mm
Magnet
- Flux density B 0.95T
- Force factor Bl 1.9N/A
- Motor constant Bl/√RE 1.03N/√W
- Air gap height HAG 3mm
Diaphragm
- Effective diameter 84mm
- Effective area SD 56cm²
- Moving mass MMS 1.9g
- Moving mass (without air load) MMD 1.6g
Suspensions
- Stiffness KMS 2.34N/mm
- Compliance CMS 427µm/N
- Equivalent volume to the compliance VAS 1.9L
- Mechanical resistance RMS 0.35N·s/m
Dimensions
- Nominal diameter 4″
- 100mm
- Baffle cutout diameter 93mm
- Volume occupied by the driver (estimated) 0.14L
- Net weight 0.16kg
.gif)
.gif)
.gif)
Export this driver to a simulation software:
Closed Box Simulator·





