Audes 100W100-6

Woofer

Nominal diameter10″ / 254 mm
Resonance33 Hz
Q factor0.66
Sensitivity85.9 dB
Linear excursion± 8.5 mm
Program Power300 W
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
Discard
Apply
  • Sensitivity (1W, 1m, infinite baffle) SPL1W 85.9dB
  • Frequency response 35 - 600Hz

Thiele & Small parameters

  • Resonance frequency (free air) fS 33Hz
  • Mechanical quality factor QMS 4.66
  • Electrical quality factor QES 0.77
  • Total quality factor QTS 0.66

Large signal parameters

  • Maximum linear excursion xmax 8.5mm
  • Air volume displaced at xmax VD 287cm³
  • Power handling P 160W
  • Program power Pmax 300W

Voice Coil

  • Nominal impedance Z 6Ω
  • DC resistance RE 4.8Ω
  • Inductance (1kHz) LE 1.1mH
  • VC Diameter 50mm
  • Winding height HVC 24mm

Magnet

  • Force factor Bl 9.5N/A
  • Motor constant Bl/√RE 4.34N/√W
  • Air gap height HAG 7mm
  • Weight 2.05kg

Diaphragm

  • Effective diameter 207mm
  • Effective area SD 337cm²
  • Moving mass MMS 69.4g
  • Moving mass (without air load) MMD 64.9g

Suspensions

  • Stiffness KMS 2.94N/mm
  • Compliance CMS 340µm/N
  • Equivalent volume to the compliance VAS 55.6L
  • Mechanical resistance RMS 3.05N·s/m

Dimensions

  • Nominal diameter 10
  • 254mm
  • Volume occupied by the driver (estimated) 1.9L
  • Net weight 4.5kg
Audes 100W100-6 SPL & Impedance
Audes 100W100-6 Dimensions

Similar subwoofers to Audes 100W100-6

Morel PRIMO 124 Subwoofer

Morel PRIMO 124

4 Ω
12 Subwoofer
fS32 Hz
SD434 cm²
22 - 900 Hz
QTS0.52
xmax8 mm
SPL1W87 dB
Bl/√RE5.87
Pmax700 W
Dayton Audio UMII12-22 Subwoofer

Dayton Audio UMII12-22

2 x 2 Ω
12 Subwoofer
fS31 Hz
SD528 cm²
22 - 400 Hz
QTS0.56
xmax22 mm
SPL1W85.4 dB
Bl/√RE7.22
Pmax1600 W
MD Lab SW-ES10 Subwoofer

MD Lab SW-ES10

4 Ω
10 Subwoofer
fS33.4 Hz
SD330 cm²
QTS0.65
SPL1W85 dB
Bl/√RE4.5
Pmax300 W