B&C Speaker 12NW100
4Ω
8Ω
Subwoofer
Nominal diameter | 12″ / 320 mm |
Resonance | 42 Hz |
Q factor | 0.20 |
Sensitivity | 93.7 dB |
Linear excursion | ± 9 mm |
Program Power | 2000 W |
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.7dB
- Frequency response 45 - 1500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 42Hz
- Mechanical quality factor QMS 3.60
- Electrical quality factor QES 0.21
- Total quality factor QTS 0.20
Large signal parameters
- Maximum linear excursion xmax 9mm
- Air volume displaced at xmax VD 478cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.1Ω
- Inductance (1kHz) LE 1.9mH
- VC Diameter 100mm
- Winding height HVC 25mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.2T
- Force factor Bl 28N/A
- Motor constant Bl/√RE 12.4N/√W
- Air gap height HAG 12mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 119g
- Moving mass (without air load) MMD 110g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 8.55N/mm
- Compliance CMS 117µm/N
- Equivalent volume to the compliance VAS 44L
- Mechanical resistance RMS 8.72N·s/m
- Spider material Silicone
Dimensions
- Nominal diameter 12″
- 320mm
- Overall diameter 319mm
- Baffle cutout diameter 281mm
- Overall depth 137mm
- Flange thickness 13mm
- Mounting depth 124mm
- Volume occupied by the driver 2.7L
- Net weight 8.2kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





