B&C Speaker 12PS100
8Ω
Subwoofer
Nominal diameter | 12″ / 320 mm |
Resonance | 44 Hz |
Q factor | 0.27 |
Sensitivity | 92.7 dB |
Linear excursion | ± 8 mm |
Program Power | 1400 W |
.png)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.7dB
- Frequency response 45 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 44Hz
- Mechanical quality factor QMS 3.90
- Electrical quality factor QES 0.29
- Total quality factor QTS 0.27
Large signal parameters
- Maximum linear excursion xmax 8mm
- Air volume displaced at xmax VD 425cm³
- Power handling P 700W
- Program power Pmax 1400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 2mH
- VC Diameter 100mm
- Winding height HVC 21mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.05T
- Force factor Bl 22.5N/A
- Motor constant Bl/√RE 9.77N/√W
- Air gap height HAG 11mm
- Material Ferrite
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 106g
- Moving mass (without air load) MMD 97.2g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 7.63N/mm
- Compliance CMS 131µm/N
- Equivalent volume to the compliance VAS 47L
- Mechanical resistance RMS 7.51N·s/m
- Spider material Silicone
Dimensions
- Nominal diameter 12″
- 320mm
- Overall diameter 319mm
- Baffle cutout diameter 281mm
- Overall depth 118mm
- Flange thickness 13mm
- Mounting depth 105mm
- Volume occupied by the driver 3.5L
- Net weight 8.8kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





