PHL audio 4310NdU
8Ω
Subwoofer
| Nominal diameter | 12″ / 300 mm |
| Resonance | 43 Hz |
| Q factor | 0.27 |
| Sensitivity | 93.5 dB |
| Linear excursion | ± 10 mm |
| Program Power | 1000 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.5dB
- Frequency response 30 - 1500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 43Hz
- Mechanical quality factor QMS 4.62
- Electrical quality factor QES 0.28
- Total quality factor QTS 0.27
Large signal parameters
- Maximum linear excursion xmax 10mm
- Maximum excursion before damage xlim 18mm
- Air volume displaced at xmax VD 527cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 1.6mH
- VC Diameter 77mm
- Winding height HVC 25mm
Magnet
- Force factor Bl 22N/A
- Motor constant Bl/√RE 9.47N/√W
- Air gap height HAG 10mm
- Diameter 140mm
- Material Neodymium
Diaphragm
- Effective diameter 259mm
- Effective area SD 527cm²
- Moving mass MMS 93.1g
- Moving mass (without air load) MMD 84.6g
Suspensions
- Stiffness KMS 7.14N/mm
- Compliance CMS 140µm/N
- Equivalent volume to the compliance VAS 56.7L
- Mechanical resistance RMS 5.44N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Overall diameter 307mm
- Baffle cutout diameter 282mm
- Overall depth 155mm
- Flange thickness 13mm
- Mounting depth 142mm
- Volume occupied by the driver 2.1L
- Net weight 5.9kg
.png)
.png)
.png)
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.jpg.webp)
.png.webp)