B&C Speaker 15SW115
4Ω
8ΩSubwoofer
Nominal diameter | 15″ / 380 mm |
Resonance | 34 Hz |
Q factor | 0.22 |
Sensitivity | 94.1 dB |
Linear excursion | ± 13.5 mm |
Program Power | 3400 W |
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.1dB
- Frequency response 35 - 1500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 34Hz
- Mechanical quality factor QMS 5.80
- Electrical quality factor QES 0.23
- Total quality factor QTS 0.22
Large signal parameters
- Maximum linear excursion xmax 13.5mm
- Air volume displaced at xmax VD 1154cm³
- Power handling P 1700W
- Program power Pmax 3400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.2Ω
- Inductance (1kHz) LE 1.27mH
- VC Diameter 116mm
- Winding height HVC 34mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.15T
- Force factor Bl 25.5N/A
- Motor constant Bl/√RE 14.3N/√W
- Air gap height HAG 14mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 330mm
- Effective area SD 855cm²
- Moving mass MMS 212g
- Moving mass (without air load) MMD 194g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 10N/mm
- Compliance CMS 100µm/N
- Equivalent volume to the compliance VAS 105L
- Mechanical resistance RMS 7.81N·s/m
- Spider material Silicone
Dimensions
- Nominal diameter 15″
- 380mm
- Overall diameter 393mm
- Baffle cutout diameter 353mm
- Overall depth 193mm
- Flange thickness 16mm
- Mounting depth 177mm
- Volume occupied by the driver 7L
- Net weight 11.1kg
.jpg)
.jpg)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





