B&C Speaker 15SW115
4Ω
8Ω
Subwoofer
Nominal diameter | 15″ / 380 mm |
Resonance | 35 Hz |
Q factor | 0.24 |
Sensitivity | 93.9 dB |
Linear excursion | ± 13.5 mm |
Program Power | 3400 W |
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.9dB
- Frequency response 35 - 1500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 35Hz
- Mechanical quality factor QMS 4.40
- Electrical quality factor QES 0.25
- Total quality factor QTS 0.24
Large signal parameters
- Maximum linear excursion xmax 13.5mm
- Air volume displaced at xmax VD 1154cm³
- Power handling P 1700W
- Program power Pmax 3400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 1.8mH
- VC Diameter 116mm
- Winding height HVC 34mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.15T
- Force factor Bl 30N/A
- Motor constant Bl/√RE 13.2N/√W
- Air gap height HAG 14mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 330mm
- Effective area SD 855cm²
- Moving mass MMS 200g
- Moving mass (without air load) MMD 182g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 9.52N/mm
- Compliance CMS 105µm/N
- Equivalent volume to the compliance VAS 110L
- Mechanical resistance RMS 10N·s/m
- Spider material Silicone
Dimensions
- Nominal diameter 15″
- 380mm
- Overall diameter 393mm
- Baffle cutout diameter 353mm
- Overall depth 193mm
- Flange thickness 16mm
- Mounting depth 177mm
- Volume occupied by the driver 7L
- Net weight 11.1kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





