B&C Speaker 18DS115
4Ω
8ΩSubwoofer
Nominal diameter | 18″ / 460 mm |
Resonance | 30 Hz |
Q factor | 0.17 |
Sensitivity | 95 dB |
Linear excursion | ± 16.5 mm |
Program Power | 3400 W |
.png)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95dB
- Frequency response 30 - 500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 30Hz
- Mechanical quality factor QMS 4.75
- Electrical quality factor QES 0.18
- Total quality factor QTS 0.17
Large signal parameters
- Maximum linear excursion xmax 16.5mm
- Air volume displaced at xmax VD 1997cm³
- Power handling P 1700W
- Program power Pmax 3400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.3Ω
- Inductance (1kHz) LE 2.8mH
- VC Diameter 116mm
- Winding height HVC 40mm
- Winding material Aluminium
- Former material Glass Fibre
Magnet
- Flux density B 0.8T
- Force factor Bl 34N/A
- Motor constant Bl/√RE 18.7N/√W
- Air gap height HAG 14mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 393mm
- Effective area SD 1210cm²
- Moving mass MMS 348g
- Moving mass (without air load) MMD 319g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 11.9N/mm
- Compliance CMS 84µm/N
- Equivalent volume to the compliance VAS 177L
- Mechanical resistance RMS 13.8N·s/m
- Spider material Silicone
Dimensions
- Nominal diameter 18″
- 460mm
- Overall diameter 460mm
- Baffle cutout diameter 422mm
- Overall depth 248mm
- Flange thickness 16mm
- Mounting depth 232mm
- Volume occupied by the driver 10L
- Net weight 12.55kg
.jpg)
.jpg)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





