B&C Speaker 21SW152

• Sensitivity (1W, 1m, infinite baffle) SPL1W 95.2dB
• Frequency response 30 - 1000Hz

Thiele & Small parameters

• Resonance frequency (free air) fS 32Hz
• Mechanical quality factor QMS 7.00
• Electrical quality factor QES 0.31
• Total quality factor QTS 0.30

Large signal parameters

• Maximum linear excursion xmax 15mm
• Air volume displaced at xmax VD 2520cm³
• Power handling P 2000W
• Program power Pmax 4000W

Voice Coil

• Nominal impedance Z 4Ω
• DC resistance RE 3.3Ω
• Inductance (1kHz) LE 1.5mH
• VC Diameter 153mm
• Winding height HVC 30mm
• Winding material Copper
• Former material Glass Fibre

Magnet

• Flux density B 1.2T
• Force factor Bl 32.5N/A
• Motor constant Bl/√RE 17.9N/√W
• Air gap height HAG 12mm
• Material Neodymium Inside Slug

Diaphragm

• Effective diameter 462mm
• Effective area SD 1680cm²
• Moving mass MMS 460g
• Moving mass (without air load) MMD 412g
• Material Waterproof Both Sides

Suspensions

• Stiffness KMS 20N/mm
• Compliance CMS 50µm/N
• Equivalent volume to the compliance VAS 200L
• Mechanical resistance RMS 13.2N·s/m
• Spider material Silicone

Dimensions

• Nominal diameter 21″
• 530mm
• Overall diameter 547mm
• Baffle cutout diameter 508mm
• Overall depth 261mm
• Flange thickness 16mm
• Mounting depth 245mm
• Volume occupied by the driver 16L
• Net weight 18.5kg