B&C Speaker 6CLA51
8Ω
Woofer
| Nominal diameter | 6.5″ / 170 mm |
| Resonance | 96 Hz |
| Q factor | 0.32 |
| Sensitivity | 92.1 dB |
| Linear excursion | ± 4.8 mm |
| Program power | 500 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.1dB
- Frequency response 100 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 96Hz
- Mechanical quality factor QMS 2.90
- Electrical quality factor QES 0.36
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion (one way) xmax 4.8mm
- Air volume displaced at xmax VD 63cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.0Ω
- Inductance (1kHz) LE 0.9mH
- VC Diameter 51mm
- Winding height HVC 13.5mm
- Winding material Aluminium
- Former material Polyimide
Magnet
- Flux density B 1.05T
- Force factor Bl 11.4N/A
- Motor constant Bl/√RE 5.1N/√W
- Air gap height HAG 8mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 130mm
- Effective area SD 132cm²
- Moving mass (including air load) MMS 15g
- Moving mass MMD 13.8g
- Material Waterproof Front Side
Suspensions
- Stiffness KMS 6.76N/mm
- Compliance CMS 148µm/N
- Equivalent volume to the compliance VAS 4.3L
- Mechanical resistance RMS 3.15N·s/m
Dimensions
- Nominal diameter 6.5″
- 170mm
- Overall diameter 180mm
- Baffle cutout diameter 146mm
- Overall depth 80mm
- Flange thickness 7mm
- Mounting depth 73mm
- Volume occupied by the driver (estimated) 0.46L
- Net weight 1.2kg
.png)
.png)
.png)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.webp.webp)
.jpg.webp)