B&C Speaker 6MDN44
8Ω
16ΩMid-range
Nominal diameter | 6.5″ / 170 mm |
Resonance | 140 Hz |
Q factor | 0.40 |
Sensitivity | 94.1 dB |
Linear excursion | ± 2.5 mm |
Program Power | 400 W |
.png)
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.1dB
- Frequency response 150 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 140Hz
- Mechanical quality factor QMS 2.80
- Electrical quality factor QES 0.46
- Total quality factor QTS 0.40
Large signal parameters
- Maximum linear excursion xmax 2.5mm
- Air volume displaced at xmax VD 33cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 0.47mH
- VC Diameter 44mm
- Winding height HVC 10mm
- Winding material Aluminium
- Former material Glass Fibre
Magnet
- Flux density B 1.45T
- Force factor Bl 11N/A
- Motor constant Bl/√RE 4.73N/√W
- Air gap height HAG 6mm
- Material Neodymium Ring
Diaphragm
- Effective diameter 130mm
- Effective area SD 132cm²
- Moving mass MMS 11g
- Moving mass (without air load) MMD 9.8g
- Material Waterproof Front Side
Suspensions
- Stiffness KMS 9.09N/mm
- Compliance CMS 110µm/N
- Equivalent volume to the compliance VAS 2.7L
- Mechanical resistance RMS 3.46N·s/m
Dimensions
- Nominal diameter 6.5″
- 170mm
- Overall diameter 187mm
- Baffle cutout diameter 145mm
- Overall depth 73mm
- Flange thickness 11mm
- Mounting depth 62mm
- Volume occupied by the driver 0.6L
- Net weight 1.0kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





