PHL audio 1683-26
8Ω
Mid-range
Nominal diameter | 6.5″ / 170 mm |
Resonance | 125 Hz |
Q factor | 0.32 |
Sensitivity | 93.7 dB |
Linear excursion | ± 2.5 mm |
Program Power | 500 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.7dB
- Frequency response 300 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 125Hz
- Mechanical quality factor QMS 4.86
- Electrical quality factor QES 0.35
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 2.5mm
- Maximum excursion before damage xlim 9mm
- Air volume displaced at xmax VD 32cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 0.599mH
- VC Diameter 51mm
- Winding height HVC 11mm
Magnet
- Force factor Bl 12.5N/A
- Motor constant Bl/√RE 5.43N/√W
- Air gap height HAG 9mm
- Diameter 137mm
- Material Ferrite
Diaphragm
- Effective diameter 128mm
- Effective area SD 129cm²
- Moving mass MMS 13g
- Moving mass (without air load) MMD 11.9g
Suspensions
- Stiffness KMS 8.33N/mm
- Compliance CMS 120µm/N
- Equivalent volume to the compliance VAS 2.9L
- Mechanical resistance RMS 2.1N·s/m
Dimensions
- Nominal diameter 6.5″
- 170mm
- Overall diameter 163mm
- Baffle cutout diameter 146mm
- Overall depth 82mm
- Flange thickness 8mm
- Mounting depth 74mm
- Volume occupied by the driver 0.64L
- Net weight 2.8kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





