Celestion CF1230F
8Ω
Low frequency
Nominal diameter | 12″ / 305 mm |
Resonance | 56.5 Hz |
Q factor | 0.32 |
Sensitivity | 95.5 dB |
Linear excursion | ± 7.5 mm |
Program Power | 1000 W |
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.5dB
- Frequency response 50 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 56.5Hz
- Mechanical quality factor QMS 4.33
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 7.5mm
- Air volume displaced at xmax VD 398cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.1Ω
- Inductance (1kHz) LE 0.74mH
- VC Diameter 75mm
- Winding height HVC 19mm
- Winding material Edgewound copper clad aluminium
- Former material Glass fibre
Magnet
- Force factor Bl 18.3N/A
- Motor constant Bl/√RE 8.13N/√W
- Air gap height HAG 8mm
- Weight 2.2kg
- Material Ferrite
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 63.8g
- Moving mass (without air load) MMD 55g
- Material Glass loaded paper (weather-resistant)
Suspensions
- Stiffness KMS 8.33N/mm
- Compliance CMS 120µm/N
- Equivalent volume to the compliance VAS 49.6L
- Mechanical resistance RMS 5.23N·s/m
- Surround material Cloth-sealed
Dimensions
- Nominal diameter 12″
- 305mm
- Overall diameter 315mm
- Baffle cutout diameter 282mm
- Overall depth 153mm
- Volume occupied by the driver (estimated) 3L
- Net weight 6.8kg
- Frame material Cast aluminium
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·





