Ciare 12.00SW
4Ω
8ΩSubwoofer
| Nominal diameter | 12″ / 320 mm |
| Resonance | 29 Hz |
| Q factor | 0.29 |
| Sensitivity | 88 dB |
| Linear excursion | ± 13.5 mm |
| Program Power | 2000 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88dB
- Frequency response 30 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 29Hz
- Mechanical quality factor QMS 2.30
- Electrical quality factor QES 0.33
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion xmax 13.5mm
- Air volume displaced at xmax VD 706cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.3Ω
- Inductance (1kHz) LE 1.6mH
- VC Diameter 100mm
- Winding height HVC 32mm
- Winding material Copper
- Former material Aluminum
Magnet
- Force factor Bl 19.5N/A
- Motor constant Bl/√RE 10.7N/√W
- Air gap height HAG 10mm
- Material Ferrite
Diaphragm
- Effective diameter 258mm
- Effective area SD 523cm²
- Moving mass MMS 201g
- Moving mass (without air load) MMD 192g
- Material Treated Cellulose
Suspensions
- Stiffness KMS 6.94N/mm
- Compliance CMS 144µm/N
- Equivalent volume to the compliance VAS 55L
- Mechanical resistance RMS 15.9N·s/m
- Surround material Rubber - Half Roll
- Spider material Nomex Fabric
Dimensions
- Nominal diameter 12″
- 320mm
- Overall diameter 315mm
- Baffle cutout diameter 282mm
- Overall depth 149mm
- Flange thickness 19mm
- Mounting depth 130mm
- Volume occupied by the driver (estimated) 4.1L
- Net weight 11.1kg
- Frame material Diecast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.jpg.webp)