Ciare CM200N ENG
4Ω
Subwoofer
| Nominal diameter | 8″ / 200 mm |
| Resonance | 94.3 Hz |
| Q factor | 0.46 |
| Sensitivity | 93 dB |
| Linear excursion | ± 3.8 mm |
| Program power | 250 W |
Discontinued
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93dB
- Frequency response 80 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 94.3Hz
- Mechanical quality factor QMS 3.82
- Electrical quality factor QES 0.52
- Total quality factor QTS 0.46
Large signal parameters
- Maximum linear excursion (one way) xmax 3.8mm
- Air volume displaced at xmax VD 76cm³
- Power handling P 120W
- Program power Pmax 250W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz) LE 0.42mH
- VC Diameter 38mm
- Winding material Copper
- Former material Aluminium
Magnet
- Force factor Bl 8.55N/A
- Motor constant Bl/√RE 4.63N/√W
- Air gap height HAG 7mm
- Material Ferrite
Diaphragm
- Effective diameter 116mm
- Effective area SD 203cm²
- Moving mass (including air load) MMS 18.9g
- Moving mass MMD 16.7g
Suspensions
- Stiffness KMS 6.67N/mm
- Compliance CMS 150µm/N
- Equivalent volume to the compliance VAS 8.78L
- Mechanical resistance RMS 2.93N·s/m
- Spider material Nomex
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 210mm
- Baffle cutout diameter 180mm
- Overall depth 84mm
- Flange thickness 8mm
- Mounting depth 76mm
- Volume occupied by the driver (estimated) 0.7L
- Frame material Steel
.png)
.png)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)
.jpg.webp)