Ciare CME201
4Ω
Mid Bass
Nominal diameter | 8″ / 200 mm |
Resonance | 60 Hz |
Q factor | 0.40 |
Sensitivity | 91.2 dB |
Linear excursion | ± 4.5 mm |
Program Power | 450 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 91.2dB
- Frequency response 70 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 60Hz
- Mechanical quality factor QMS 4.30
- Electrical quality factor QES 0.44
- Total quality factor QTS 0.40
Large signal parameters
- Maximum linear excursion xmax 4.5mm
- Air volume displaced at xmax VD 95cm³
- Power handling P 220W
- Program power Pmax 450W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.1Ω
- Inductance (1kHz) LE 0.44mH
- VC Diameter 50mm
- Winding height HVC 12.5mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Force factor Bl 7.5N/A
- Motor constant Bl/√RE 4.26N/√W
- Air gap height HAG 8mm
- Material Ferrite
Diaphragm
- Effective diameter 164mm
- Effective area SD 210cm²
- Moving mass MMS 22g
- Moving mass (without air load) MMD 19.7g
- Material Doped cellulose fiber
Suspensions
- Stiffness KMS 3.01N/mm
- Compliance CMS 332µm/N
- Equivalent volume to the compliance VAS 21.5L
- Mechanical resistance RMS 1.93N·s/m
- Surround material Cotton fabric
- Spider material Cotton fabric
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 210mm
- Baffle cutout diameter 182mm
- Overall depth 97mm
- Flange thickness 8mm
- Mounting depth 89mm
- Volume occupied by the driver (estimated) 0.94L
- Net weight 2.6kg
- Frame material Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





