Ciare CSW7015EVO
2x2Ω
Subwoofer
Nominal diameter | 15″ / 380 mm |
Resonance | 42 Hz |
Q factor | 0.42 |
Sensitivity | 89.7 dB |
Linear excursion | ± 23 mm |
Program Power | 7000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89.7dB
- Frequency response 25 - 200Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 42Hz
- Mechanical quality factor QMS 8.20
- Electrical quality factor QES 0.44
- Total quality factor QTS 0.42
Large signal parameters
- Maximum linear excursion xmax 23mm
- Air volume displaced at xmax VD 1909cm³
- Power handling P 700W
- Program power Pmax 7000W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.9Ω
- Inductance (1kHz, in series) LE 3.32mH
- VC Diameter 75mm
- Winding height HVC 52mm
- Winding material Flat aluminium
- Former material Aluminum
Magnet
- Force factor (in series) Bl 30.5N/A
- Motor constant Bl/√RE 15.4N/√W
- Air gap height HAG 15mm
- Material Ferrite
Diaphragm
- Effective diameter 325mm
- Effective area SD 830cm²
- Moving mass MMS 410g
- Moving mass (without air load) MMD 393g
- Material Reinforced cellulose fiber
Suspensions
- Stiffness KMS 27.8N/mm
- Compliance CMS 36µm/N
- Equivalent volume to the compliance VAS 33L
- Mechanical resistance RMS 13.2N·s/m
- Surround material Polyurethane
- Spider material Nomex Fabric
Dimensions
- Nominal diameter 15″
- 380mm
- Overall diameter 388mm
- Baffle cutout diameter 350mm
- Overall depth 239mm
- Flange thickness 36mm
- Mounting depth 203mm
- Volume occupied by the driver (estimated) 9.1L
- Net weight 19.6kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





