Ciare CW131
4Ω
Woofer
Nominal diameter | 5″ / 130 mm |
Resonance | 65 Hz |
Q factor | 0.39 |
Sensitivity | 86.9 dB |
Linear excursion | ± 4 mm |
Program Power | 180 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.9dB
Thiele & Small parameters
- Resonance frequency (free air) fS 65Hz
- Mechanical quality factor QMS 2.70
- Electrical quality factor QES 0.45
- Total quality factor QTS 0.39
Large signal parameters
- Maximum linear excursion xmax 4mm
- Air volume displaced at xmax VD 32cm³
- Power handling P 70W
- Program power Pmax 180W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.7Ω
- Inductance (1kHz) LE 0.43mH
- VC Diameter 32mm
- Winding height HVC 11mm
- Former material Aluminum
Magnet
- Force factor Bl 5.68N/A
- Motor constant Bl/√RE 2.97N/√W
- Air gap height HAG 6mm
Diaphragm
- Effective diameter 100mm
- Effective area SD 79cm²
- Moving mass MMS 9.7g
- Moving mass (without air load) MMD 9.2g
- Material Treated Cellulose
Suspensions
- Stiffness KMS 1.64N/mm
- Compliance CMS 610µm/N
- Equivalent volume to the compliance VAS 5.3L
- Mechanical resistance RMS 1.47N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 5″
- 130mm
- Overall diameter 130mm
- Baffle cutout diameter 112mm
- Overall depth 70mm
- Flange thickness 7mm
- Mounting depth 63mm
- Volume occupied by the driver (estimated) 0.37L
- Net weight 1.35kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





