Ciare HWB160
4Ω
8Ω
Woofer
Nominal diameter | 6.5″ / 165 mm |
Resonance | 43 Hz |
Q factor | 0.37 |
Sensitivity | 88.9 dB |
Linear excursion | ± 4.5 mm |
Program Power | 160 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88.9dB
Thiele & Small parameters
- Resonance frequency (free air) fS 43Hz
- Mechanical quality factor QMS 4.70
- Electrical quality factor QES 0.41
- Total quality factor QTS 0.37
Large signal parameters
- Maximum linear excursion xmax 4.5mm
- Air volume displaced at xmax VD 64cm³
- Power handling P 80W
- Program power Pmax 160W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 1.3mH
- VC Diameter 32mm
- Winding height HVC 12mm
- Former material Kapton
Magnet
- Force factor Bl 7.3N/A
- Motor constant Bl/√RE 3.03N/√W
- Air gap height HAG 6mm
Diaphragm
- Effective diameter 134mm
- Effective area SD 141cm²
- Moving mass MMS 13.9g
- Moving mass (without air load) MMD 12.6g
- Material Doped cellulose fiber
Suspensions
- Stiffness KMS 1.02N/mm
- Compliance CMS 983µm/N
- Equivalent volume to the compliance VAS 28L
- Mechanical resistance RMS 0.8N·s/m
- Surround material Rubber
- Spider material Cotton fabric
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 174mm
- Baffle cutout diameter 146mm
- Overall depth 79mm
- Flange thickness 6mm
- Mounting depth 73mm
- Volume occupied by the driver (estimated) 0.53L
- Net weight 1.6kg
- Frame material Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





