Ciare PWA10.50
8Ω
Woofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 57 Hz |
| Q factor | 0.40 |
| Sensitivity | 93.7 dB |
| Linear excursion | ± 5.8 mm |
| Program Power | 500 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.7dB
- Frequency response 50 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 57Hz
- Mechanical quality factor QMS 3.74
- Electrical quality factor QES 0.45
- Total quality factor QTS 0.40
Large signal parameters
- Maximum linear excursion xmax 5.8mm
- Maximum excursion before damage xlim 24mm
- Air volume displaced at xmax VD 201cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.0Ω
- Inductance (1kHz) LE 0.66mH
- VC Diameter 50mm
- Winding height HVC 15mm
- Winding material Aluminum
- Former material Glass Fiber
Magnet
- Force factor Bl 11.4N/A
- Motor constant Bl/√RE 5.1N/√W
- Air gap height HAG 7mm
- Material Ferrite
Diaphragm
- Effective diameter 210mm
- Effective area SD 346cm²
- Moving mass MMS 32g
- Moving mass (without air load) MMD 27.3g
- Material Water repellent
Suspensions
- Stiffness KMS 4.18N/mm
- Compliance CMS 239µm/N
- Equivalent volume to the compliance VAS 39.9L
- Mechanical resistance RMS 3.06N·s/m
- Surround material M-Roll - Polycotton
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 257mm
- Baffle cutout diameter 233mm
- Overall depth 109mm
- Flange thickness 7mm
- Mounting depth 102mm
- Volume occupied by the driver (estimated) 1.2L
- Net weight 2.8kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)