D.A.S. Audio 10B
8Ω
Mid-range
Nominal diameter | 10″ / 254 mm |
Resonance | 59 Hz |
Q factor | 0.19 |
Sensitivity | 96 dB |
Linear excursion | ± 4 mm |
Program Power | 800 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96dB
- Frequency response 55 - 5700Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 59Hz
- Mechanical quality factor QMS 8.15
- Electrical quality factor QES 0.19
- Total quality factor QTS 0.19
Large signal parameters
- Maximum linear excursion xmax 4mm
- Maximum excursion before damage xlim 10mm
- Air volume displaced at xmax VD 144cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz, estimated) LE 1.63mH
- VC Diameter 102mm
- Winding height HVC 12mm
- Winding material Aluminium EFW
- Former material Glass Fibre Reinforced Polymer
Magnet
- Force factor Bl 22.8N/A
- Motor constant Bl/√RE 9.72N/√W
- Air gap height HAG 8mm
- Material Ferrite
Diaphragm
- Effective diameter 214mm
- Effective area SD 360cm²
- Moving mass MMS 49g
- Moving mass (without air load) MMD 44.2g
Suspensions
- Stiffness KMS 6.67N/mm
- Compliance CMS 150µm/N
- Equivalent volume to the compliance VAS 27.6L
- Mechanical resistance RMS 2.23N·s/m
- Surround material Polycotton
- Spider material Polycotton
Dimensions
- Nominal diameter 10″
- 254mm
- Volume occupied by the driver (estimated) 1.5L
- Frame material Injected Aluminum
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





