PHL audio 3570NdS
8Ω
Woofer
Nominal diameter | 10″ / 250 mm |
Resonance | 53 Hz |
Q factor | 0.19 |
Sensitivity | 95 dB |
Linear excursion | ± 6.5 mm |
Program Power | 600 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95dB
- Frequency response 40 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 53Hz
- Mechanical quality factor QMS 3.62
- Electrical quality factor QES 0.20
- Total quality factor QTS 0.19
Large signal parameters
- Maximum linear excursion xmax 6.5mm
- Maximum excursion before damage xlim 14mm
- Air volume displaced at xmax VD 231cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 1.62mH
- VC Diameter 64mm
- Winding height HVC 18mm
Magnet
- Force factor Bl 20.8N/A
- Motor constant Bl/√RE 8.95N/√W
- Air gap height HAG 10mm
- Diameter 118mm
- Material Neodymium
Diaphragm
- Effective diameter 213mm
- Effective area SD 356cm²
- Moving mass MMS 49g
- Moving mass (without air load) MMD 44.2g
Suspensions
- Stiffness KMS 5.56N/mm
- Compliance CMS 180µm/N
- Equivalent volume to the compliance VAS 33.3L
- Mechanical resistance RMS 4.51N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 255mm
- Baffle cutout diameter 229mm
- Overall depth 133mm
- Flange thickness 11mm
- Mounting depth 122mm
- Volume occupied by the driver 1.1L
- Net weight 4.1kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





