Dayton Audio Odeum Apollo 12LF
8Ω
Subwoofer
Nominal diameter | 12″ / 320 mm |
Resonance | 28 Hz |
Q factor | 0.21 |
Sensitivity | 93 dB |
Linear excursion | ± 9.3 mm |
Program Power | 800 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93dB
- Frequency response 30 - 1500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 28Hz
- Mechanical quality factor QMS 5.19
- Electrical quality factor QES 0.22
- Total quality factor QTS 0.21
Large signal parameters
- Maximum linear excursion xmax 9.3mm
- Air volume displaced at xmax VD 493cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.7Ω
- Inductance (1kHz) LE 1.47mH
- VC Diameter 76.2mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 21.8N/A
- Motor constant Bl/√RE 8.42N/√W
- Material Ferrite
Diaphragm
- Effective diameter 261mm
- Effective area SD 533cm²
- Moving mass MMS 88.3g
- Moving mass (without air load) MMD 79.4g
- Material Treated Paper
Suspensions
- Stiffness KMS 2.7N/mm
- Compliance CMS 370µm/N
- Equivalent volume to the compliance VAS 148L
- Mechanical resistance RMS 2.99N·s/m
- Surround material Cloth
Dimensions
- Nominal diameter 12″
- 320mm
- Overall diameter 320mm
- Baffle cutout diameter 292mm
- Overall depth 152mm
- Volume occupied by the driver (estimated) 2.7L
- Frame material Cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





