Dayton Audio Classic DC130B-4

• Sensitivity (1W, 1m, infinite baffle) SPL1W 87.6dB
• Frequency response 50 - 5000Hz

Thiele & Small parameters

• Resonance frequency (free air) fS 51.8Hz
• Mechanical quality factor QMS 2.52
• Electrical quality factor QES 0.41
• Total quality factor QTS 0.35

Large signal parameters

• Maximum linear excursion xmax 2.5mm
• Air volume displaced at xmax VD 23cm³
• Power handling P 40W
• Program power Pmax 80W

Voice Coil

• Nominal impedance Z 4Ω
• DC resistance RE 3.2Ω
• Inductance (1kHz) LE 0.5mH
• VC Diameter 25.4mm
• Winding material Copper
• Former material Aluminum

Magnet

• Force factor Bl 4.89N/A
• Motor constant Bl/√RE 2.73N/√W
• Weight 0.312kg
• Material Ferrite

Diaphragm

• Effective diameter 108mm
• Effective area SD 91.6cm²
• Moving mass MMS 9.4g
• Moving mass (without air load) MMD 8.7g
• Material Coated Paper

Suspensions

• Stiffness KMS 1N/mm
• Compliance CMS 1000µm/N
• Equivalent volume to the compliance VAS 12.3L
• Mechanical resistance RMS 1.21N·s/m
• Surround material Rubber

Dimensions

• Nominal diameter 5.25″
• 145mm
• Overall diameter 145mm
• Baffle cutout diameter 120mm
• Overall depth 68mm
• Volume occupied by the driver (estimated) 0.32L
• Frame material Steel