Dayton Audio Classic DC160-4
4Ω
8ΩWoofer
Nominal diameter | 6.5″ / 165 mm |
Resonance | 39 Hz |
Q factor | 0.43 |
Sensitivity | 84.3 dB |
Linear excursion | ± 3.4 mm |
Program Power | 120 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.3dB
- Frequency response 30 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 39Hz
- Mechanical quality factor QMS 3.31
- Electrical quality factor QES 0.49
- Total quality factor QTS 0.43
Large signal parameters
- Maximum linear excursion xmax 3.4mm
- Air volume displaced at xmax VD 47cm³
- Power handling P 60W
- Program power Pmax 120W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz, estimated) LE 0.71mH
- VC Diameter 35.5mm
- Winding material Copper
- Former material Aluminum
Magnet
- Force factor Bl 7.02N/A
- Motor constant Bl/√RE 3.81N/√W
- Weight 0.425kg
- Material Ferrite
Diaphragm
- Effective diameter 132mm
- Effective area SD 137cm²
- Moving mass MMS 29.2g
- Moving mass (without air load) MMD 28g
- Material Coated Paper
Suspensions
- Stiffness KMS 1.75N/mm
- Compliance CMS 570µm/N
- Equivalent volume to the compliance VAS 15L
- Mechanical resistance RMS 2.16N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 165mm
- Baffle cutout diameter 145mm
- Overall depth 82mm
- Volume occupied by the driver (estimated) 0.49L
- Frame material Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





