Dayton Audio Classic DC300-8
Woofer
12″ / 307 mm
Nominal diameter
23 Hz
Resonance
0.33
Q factor
89 dB
Sensitivity
± 4.3 mm
Linear excursion
160 W
Program Power
![Dayton Audio DC300-8 Woofer](/Dayton/DC300-8/Dayton_DC300-8_(Photo_1).jpg)
![Dayton Audio DC300-8 Woofer](/Dayton/DC300-8/Dayton_DC300-8_(Photo_2).jpg)
![Dayton Audio DC300-8 Woofer](/Dayton/DC300-8/Dayton_DC300-8_(Photo_3).jpg)
- Parts Express
- $$
- Amazon.com
- $$
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 88.8
- dB
- Frequency response
- 25 - 2500
- Hz
- Resonance frequency (free air)
- fS
- 22.9
- Hz
- Mechanical quality factor
- QMS
- 3.21
- Electrical quality factor
- QES
- 0.37
- Total quality factor
- QTS
- 0.33
- Maximum linear excursion
- xmax
- 4.3
- mm
- Air volume displaced at xmax
- VD
- 215
- cm³
- Power handling
- P
- 80
- W
- Program power
- Pmax
- 160
- W
- Nominal impedance
- Z
- 8
- Ω
- DC resistance
- RE
- 6.8
- Ω
- Inductance (1kHz)
- LE
- 2.93
- mH
- VC Diameter
- 51
- mm
- Winding material
- Copper
- Former material
- Aluminum
- Force factor
- Bl
- 16.3
- N/A
- Motor constant
- Bl/√RE
- 6.25
- N/√W
- Weight
- 0.85
- kg
- Material
- Ferrite
- Effective diameter
- 252
- mm
- Effective area
- SD
- 499
- cm²
- Moving mass
- MMS
- 100.7
- g
- Moving mass (without air load)
- MMD
- 92.7
- g
- Material
- Treated Paper
- Stiffness
- KMS
- 2.08
- N/mm
- Compliance
- CMS
- 480
- µm/N
- Equivalent volume to the compliance
- VAS
- 182
- L
- Mechanical resistance
- RMS
- 4.51
- N·s/m
- Surround material
- Rubber
- Nominal diameter
- 12
- ″
- 307
- mm
- Overall diameter
- 307
- mm
- Baffle cutout diameter
- 280
- mm
- Overall depth
- 132
- mm
- Volume occupied by the driver (estimated)
- 2.1
- L
- Frame material
- Steel
Available on (affiliate links)
Specifications
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![Dayton Audio DC300-8 Impedance](/Dayton/DC300-8/Dayton_DC300-8_(Impedance).png)
![Dayton Audio DC300-8 SPL](/Dayton/DC300-8/Dayton_DC300-8_(Frequency_response).png)
![Dayton Audio DC300-8 Dimensions](/Dayton/DC300-8/Dayton_DC300-8_(Dimensions).png)
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)