Dayton Audio Designer DS215-8
8Ω
Woofer
Nominal diameter | 8″ / 216 mm |
Resonance | 34.3 Hz |
Q factor | 0.31 |
Sensitivity | 88.3 dB |
Linear excursion | ± 5.5 mm |
Program Power | 160 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88.3dB
- Frequency response 35 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 34.3Hz
- Mechanical quality factor QMS 1.75
- Electrical quality factor QES 0.38
- Total quality factor QTS 0.31
Large signal parameters
- Maximum linear excursion xmax 5.5mm
- Air volume displaced at xmax VD 116cm³
- Power handling P 80W
- Program power Pmax 160W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 1.25mH
- VC Diameter 38.5mm
- Winding material Copper
- Former material Aluminum
Magnet
- Force factor Bl 9.89N/A
- Motor constant Bl/√RE 4.11N/√W
- Weight 1.389kg
- Material Ferrite
Diaphragm
- Effective diameter 164mm
- Effective area SD 211cm²
- Moving mass MMS 29.7g
- Moving mass (without air load) MMD 27.4g
- Material Coated Paper
Suspensions
- Stiffness KMS 1.39N/mm
- Compliance CMS 720µm/N
- Equivalent volume to the compliance VAS 43.1L
- Mechanical resistance RMS 3.66N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 8″
- 216mm
- Overall diameter 216mm
- Baffle cutout diameter 180mm
- Overall depth 96mm
- Volume occupied by the driver (estimated) 0.87L
- Frame material Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





