Dayton Audio LW150-4
4Ω
Woofer
| Nominal diameter | 6″ / 152 mm |
| Resonance | 62.6 Hz |
| Q factor | 0.64 |
| Sensitivity | 83 dB |
| Linear excursion | ± 4 mm |
| Program Power | 80 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 83dB
- Frequency response 60 - 1800Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 62.6Hz
- Mechanical quality factor QMS 6.01
- Electrical quality factor QES 0.72
- Total quality factor QTS 0.64
Large signal parameters
- Maximum linear excursion (one way) xmax 4mm
- Air volume displaced at xmax VD 37cm³
- Power handling P 40W
- Program power Pmax 80W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.6Ω
- Inductance (1kHz) LE 0.86mH
- VC Diameter 31.8mm
Magnet
- Force factor Bl 6.52N/A
- Motor constant Bl/√RE 3.44N/√W
Diaphragm
- Effective diameter 108mm
- Effective area SD 91.6cm²
- Moving mass MMS 21.9g
- Moving mass (without air load) MMD 21.2g
Suspensions
- Stiffness KMS 3.33N/mm
- Compliance CMS 300µm/N
- Equivalent volume to the compliance VAS 3.49L
- Mechanical resistance RMS 1.43N·s/m
Dimensions
- Nominal diameter 6″
- 152mm
- Overall diameter 152mm
- Baffle cutout diameter 127mm
- Overall depth 35mm
- Volume occupied by the driver (estimated) 0.14L
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.png.webp)
.jpg.webp)