Dayton Audio PC83-4
4Ω
8ΩFull-range
Nominal diameter | 3″ / 83 mm |
Resonance | 80.1 Hz |
Q factor | 0.54 |
Sensitivity | 83.6 dB |
Linear excursion | ± 2 mm |
Program Power | 60 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 83.6dB
- Frequency response 80 - 20000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 80.1Hz
- Mechanical quality factor QMS 3.41
- Electrical quality factor QES 0.64
- Total quality factor QTS 0.54
Large signal parameters
- Maximum linear excursion xmax 2mm
- Air volume displaced at xmax VD 6cm³
- Power handling P 30W
- Program power Pmax 60W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.9Ω
- Inductance (1kHz) LE 0.38mH
- VC Diameter 25.4mm
- Winding material Copper
- Former material Kapton®
Magnet
- Force factor Bl 2.9N/A
- Motor constant Bl/√RE 1.47N/√W
- Material Ferrite
Diaphragm
- Effective diameter 62mm
- Effective area SD 30.2cm²
- Moving mass MMS 2.7g
- Moving mass (without air load) MMD 2.6g
Suspensions
- Stiffness KMS 0.68N/mm
- Compliance CMS 1470µm/N
- Equivalent volume to the compliance VAS 1.98L
- Mechanical resistance RMS 0.4N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 3″
- 83mm
- Overall diameter 83mm
- Baffle cutout diameter 77mm
- Overall depth 50mm
- Volume occupied by the driver (estimated) 0.1L
- Frame material Stamped Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





