Dayton Audio PSS555-8
8Ω
Subwoofer
Nominal diameter | 21″ / 550 mm |
Resonance | 27.6 Hz |
Q factor | 0.33 |
Sensitivity | 95.6 dB |
Linear excursion | ± 11 mm |
Program Power | 2000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.6dB
- Frequency response 27 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 27.6Hz
- Mechanical quality factor QMS 10.70
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.33
Large signal parameters
- Maximum linear excursion xmax 11mm
- Air volume displaced at xmax VD 1909cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 1.8mH
- VC Diameter 114.3mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 29.7N/A
- Motor constant Bl/√RE 12.8N/√W
- Weight 5.67kg
- Material Ferrite
Diaphragm
- Effective diameter 470mm
- Effective area SD 1735cm²
- Moving mass MMS 316g
- Moving mass (without air load) MMD 266g
- Material Treated Paper
Suspensions
- Stiffness KMS 9.09N/mm
- Compliance CMS 110µm/N
- Equivalent volume to the compliance VAS 444L
- Mechanical resistance RMS 5.12N·s/m
- Surround material Cloth
Dimensions
- Nominal diameter 21″
- 550mm
- Overall diameter 550mm
- Baffle cutout diameter 511mm
- Overall depth 254mm
- Volume occupied by the driver (estimated) 11L
- Frame material Cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





