Dayton Audio RC180-55
4Ω
Woofer
| Nominal size | 2x7″ / 55x180 mm |
| Resonance | 52 Hz |
| Q factor | 0.89 |
| Sensitivity | 76.3 dB |
| Linear excursion | ± 4.7 mm |
| Program Power | 70 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 76.3dB
- Frequency response 50 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 52Hz
- Mechanical quality factor QMS 3.31
- Electrical quality factor QES 1.23
- Total quality factor QTS 0.89
Large signal parameters
- Maximum linear excursion (one way) xmax 4.7mm
- Air volume displaced at xmax VD 27cm³
- Power handling P 35W
- Program power Pmax 70W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.3Ω
- Inductance (1kHz) LE 0.1mH
- Former material Aluminum
Magnet
- Force factor Bl 4.23N/A
- Motor constant Bl/√RE 2.33N/√W
- Material Neodymium
Diaphragm
- Effective diameter 85mm
- Effective area SD 56.4cm²
- Moving mass MMS 20.1g
- Moving mass (without air load) MMD 20.1g
- Material Paper
Suspensions
- Stiffness KMS 2.17N/mm
- Compliance CMS 460µm/N
- Equivalent volume to the compliance VAS 2.04L
- Mechanical resistance RMS 1.98N·s/m
- Surround material Rubber
Dimensions
- Nominal size 2 x 7″
- 55 x 180mm
- Overall size 58 x 176mm
- Baffle cutout diameter 159mm
- Overall depth 77mm
- Volume occupied by the driver (estimated) 0.11L
- Frame material Polymer
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.png.webp)
.png.webp)