Dayton Audio RS100T-8
8Ω
Woofer
| Nominal diameter | 4″ / 98 mm |
| Resonance | 94.9 Hz |
| Q factor | 0.60 |
| Sensitivity | 85.9 dB |
| Linear excursion | ± 3.7 mm |
| Program Power | 60 W |
Discontinued
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 85.9dB
- Frequency response 90 - 20000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 94.9Hz
- Mechanical quality factor QMS 2.40
- Electrical quality factor QES 0.79
- Total quality factor QTS 0.60
Large signal parameters
- Maximum linear excursion xmax 3.7mm
- Air volume displaced at xmax VD 13cm³
- Power handling P 30W
- Program power Pmax 60W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.5Ω
- Inductance (1kHz) LE 0.5mH
- VC Diameter 25mm
- Winding material Copper
- Former material Aluminum
Magnet
- Force factor Bl 3.27N/A
- Motor constant Bl/√RE 1.28N/√W
- Material Ferrite
Diaphragm
- Effective diameter 68mm
- Effective area SD 36.3cm²
- Moving mass MMS 2.2g
- Moving mass (without air load) MMD 2g
- Material Black Anodized Aluminum
Suspensions
- Stiffness KMS 0.769N/mm
- Compliance CMS 1300µm/N
- Equivalent volume to the compliance VAS 2.4L
- Mechanical resistance RMS 0.55N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 4″
- 98mm
- Overall diameter 98mm
- Baffle cutout diameter 77mm
- Overall depth 51mm
- Volume occupied by the driver (estimated) 0.13L
- Frame material Cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.jpg.webp)