Dayton Audio Reference RSS315HE-22
2x2Ω
Subwoofer
| Nominal diameter | 12″ / 315 mm |
| Resonance | 32 Hz |
| Q factor | 0.46 |
| Sensitivity | 85.4 dB |
| Linear excursion | ± 25 mm |
| Program Power | 1600 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 85.4dB
- Frequency response 25 - 750Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 32Hz
- Mechanical quality factor QMS 4.80
- Electrical quality factor QES 0.51
- Total quality factor QTS 0.46
Large signal parameters
- Maximum linear excursion xmax 25mm
- Air volume displaced at xmax VD 1248cm³
- Power handling P 800W
- Program power Pmax 1600W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 4.1Ω
- Inductance (1kHz, in series) LE 2.2mH
- VC Diameter 76.5mm
- Winding material CCA
- Former material Aluminum
Magnet
- Force factor (in series) Bl 20.9N/A
- Motor constant Bl/√RE 10.3N/√W
- Material Ferrite
Diaphragm
- Effective diameter 252mm
- Effective area SD 499cm²
- Moving mass MMS 263g
- Moving mass (without air load) MMD 255g
- Material Aluminum
Suspensions
- Stiffness KMS 11.1N/mm
- Compliance CMS 90µm/N
- Equivalent volume to the compliance VAS 32.4L
- Mechanical resistance RMS 11N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 12″
- 315mm
- Overall diameter 313mm
- Baffle cutout diameter 262mm
- Overall depth 183mm
- Volume occupied by the driver (estimated) 5.6L
- Net weight 14.946kg
- Frame material Cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.jpg.webp)