EASTECH ASDWD0001-0400
4Ω
Subwoofer
| Nominal diameter | 6.5″ / 165 mm |
| Resonance | 51.4 Hz |
| Q factor | 0.66 |
| Sensitivity | 83.4 dB |
| Linear excursion | ± 3.8 mm |
| Program Power | 260 W |
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 83.4dB
Thiele & Small parameters
- Resonance frequency (free air) fS 51.4Hz
- Mechanical quality factor QMS 5.25
- Electrical quality factor QES 0.75
- Total quality factor QTS 0.66
Large signal parameters
- Maximum linear excursion xmax 3.8mm
- Air volume displaced at xmax VD 50cm³
- Power handling P 130W
- Program power Pmax 260W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz) LE 1.09mH
- VC Diameter 30.5mm
- Winding height HVC 13.5mm
- Winding material PESVW
- Former material Aluminum
Magnet
- Force factor Bl 7.09N/A
- Motor constant Bl/√RE 3.84N/√W
- Air gap height HAG 6mm
- Material Ferrite
Diaphragm
- Effective diameter 130mm
- Effective area SD 133cm²
- Moving mass MMS 33.8g
- Moving mass (without air load) MMD 32.7g
- Material Paper
Suspensions
- Stiffness KMS 3.53N/mm
- Compliance CMS 283µm/N
- Equivalent volume to the compliance VAS 7.06L
- Mechanical resistance RMS 2.08N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 6.5″
- 165mm
- Volume occupied by the driver (estimated) 0.54L
- Net weight 1.352kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)