MUSWAY MW622
2x2Ω
Subwoofer
| Nominal diameter | 6.5″ / 165 mm |
| Resonance | 51.3 Hz |
| Q factor | 0.45 |
| Sensitivity | 85 dB |
| Linear excursion | ± 3.5 mm |
| Program Power | 300 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 85dB
Thiele & Small parameters
- Resonance frequency (free air) fS 51.3Hz
- Mechanical quality factor QMS 2.98
- Electrical quality factor QES 0.53
- Total quality factor QTS 0.45
Large signal parameters
- Maximum linear excursion (one way) xmax 3.5mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 50cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 4.0Ω
- Inductance (1kHz, in series) LE 1.3mH
- VC Diameter 38mm
- Winding height HVC 14.7mm
Magnet
- Force factor (in series) Bl 9.1N/A
- Motor constant Bl/√RE 4.55N/√W
- Diameter 110mm
- Height 20mm
- Weight 0.709kg
- Material Y30
Diaphragm
- Effective diameter 135mm
- Effective area SD 144cm²
- Moving mass MMS 34.2g
- Moving mass (without air load) MMD 32.9g
- Material Non-pressed Paper
Suspensions
- Stiffness KMS 3.58N/mm
- Compliance CMS 279µm/N
- Equivalent volume to the compliance VAS 8.2L
- Mechanical resistance RMS 3.7N·s/m
- Surround material Foam
- Spider material Nomex
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 170mm
- Baffle cutout diameter 144mm
- Mounting depth 85mm
- Volume occupied by the driver (estimated) 0.54L
- Frame material Steel
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.jpg.webp)