Peerless SLS-P830946
Woofer
6.5″ / 165 mm
Nominal diameter
47 Hz
Resonance
0.43
Q factor
84 dB
Sensitivity
± 10.9 mm
Linear excursion
150 W
Program Power
![Peerless SLS-P830946 Woofer](/Peerless/SLS-P830946/Peerless_SLS-P830946_(Photo_1).jpg)
![Peerless SLS-P830946 Woofer](/Peerless/SLS-P830946/Peerless_SLS-P830946_(Photo_2).jpg)
- Parts Express
- $$
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 83.5
- dB
- Frequency response
- 30 - 600
- Hz
- Resonance frequency (free air)
- fS
- 47.0
- Hz
- Mechanical quality factor
- QMS
- 7.42
- Electrical quality factor
- QES
- 0.45
- Total quality factor
- QTS
- 0.43
- Maximum linear excursion
- xmax
- 10.9
- mm
- Air volume displaced at xmax
- VD
- 135
- cm³
- Power handling
- P
- 75
- W
- Program power
- Pmax
- 150
- W
- Nominal impedance
- Z
- 4
- Ω
- DC resistance
- RE
- 2.7
- Ω
- Inductance (1kHz)
- LE
- 0.68
- mH
- VC Diameter
- 38
- mm
- Force factor
- Bl
- 8.51
- N/A
- Motor constant
- Bl/√RE
- 5.18
- N/√W
- Air gap height
- HAG
- 8
- mm
- Material
- Ferrite
- Effective diameter
- 126
- mm
- Effective area
- SD
- 124
- cm²
- Moving mass
- MMS
- 40.6
- g
- Moving mass (without air load)
- MMD
- 39.5
- g
- Material
- Coated Paper
- Stiffness
- KMS
- 3.57
- N/mm
- Compliance
- CMS
- 280
- µm/N
- Equivalent volume to the compliance
- VAS
- 6.03
- L
- Mechanical resistance
- RMS
- 1.62
- N·s/m
- Surround material
- Rubber
- Nominal diameter
- 6.5
- ″
- 165
- mm
- Volume occupied by the driver (estimated)
- 1.0
- L
- Net weight
- 2.4
- kg
Available on (affiliate link)
Specifications
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![Peerless SLS-P830946 SPL & Impedance](/Peerless/SLS-P830946/Peerless_SLS-P830946_(Frequency_response_+_Impedance).png)
![Peerless SLS-P830946 Dimensions](/Peerless/SLS-P830946/Peerless_SLS-P830946_(Dimensions).png)
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)