| Nominal diameter | 8″ / 200 mm |
| Resonance | 36 Hz |
| Q factor | 0.50 |
| Sensitivity | 84.6 dB |
| Linear excursion | ± 12 mm |
| Program Power | 600 W |
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.6dB
Thiele & Small parameters
- Resonance frequency (free air) fS 36Hz
- Mechanical quality factor QMS 7.53
- Electrical quality factor QES 0.54
- Total quality factor QTS 0.50
Large signal parameters
- Maximum linear excursion (one way) xmax 12mm
- Maximum excursion before damage xlim 20mm
- Air volume displaced at xmax VD 286cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.8Ω
- Inductance (1kHz) LE 1.52mH
- VC Diameter 51mm
- Winding height HVC 32mm
- Former material TIL (Glass-Fibre)
Magnet
- Force factor Bl 11.2N/A
- Motor constant Bl/√RE 5.75N/√W
- Diameter 134mm
- Height 34mm
- Weight 1.928kg
Diaphragm
- Effective diameter 174mm
- Effective area SD 238cm²
- Moving mass MMS 76.5g
- Moving mass (without air load) MMD 73.8g
- Material Glass-Fibre/Honeycomb
Suspensions
- Stiffness KMS 4.03N/mm
- Compliance CMS 248µm/N
- Equivalent volume to the compliance VAS 18.9L
- Mechanical resistance RMS 2.3N·s/m
- Surround material Rubber
- Spider material Single Nomex
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 210mm
- Baffle cutout diameter 189mm
- Mounting depth 87mm
- Volume occupied by the driver (estimated) 2.4L
- Net weight 5.4kg
- Frame material Diecast Aluminium
Similar speaker drivers to ESX VXP84G
JL Audio 8W1v3-44 Ω |
|---|
| 8″ Subwoofer |
| fS | 35.4 Hz |
| SD | 211 cm² |
|
| QTS | 0.42 |
| xmax | 8 mm |
| SPL1W | 84.6 dB |
| Bl/√RE | 5.71 |
| Pmax | 300 W |
.jpg)
.jpg)
.jpg)
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.webp.webp)
.jpg.webp)
.jpg.webp)