Eminence KAPPA PRO-10A
8Ω
Mid-range
Nominal diameter | 10″ / 254 mm |
Resonance | 46 Hz |
Q factor | 0.20 |
Sensitivity | 95.4 dB |
Linear excursion | ± 3.2 mm |
Program Power | 1000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.4dB
- Frequency response 102 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 46Hz
- Mechanical quality factor QMS 10.10
- Electrical quality factor QES 0.20
- Total quality factor QTS 0.20
Large signal parameters
- Maximum linear excursion xmax 3.2mm
- Maximum excursion before damage xlim 10.9mm
- Air volume displaced at xmax VD 110cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.5Ω
- Inductance (1kHz) LE 1.15mH
- VC Diameter 76.2mm
- Winding material Copper
- Former material Polyimide
Magnet
- Force factor Bl 18.8N/A
- Motor constant Bl/√RE 7.37N/√W
- Air gap height HAG 9.5mm
- Weight 2.268kg
- Material Ferrite
Diaphragm
- Effective diameter 210mm
- Effective area SD 345cm²
- Moving mass MMS 38g
- Moving mass (without air load) MMD 33.3g
- Material Paper
Suspensions
- Stiffness KMS 3.23N/mm
- Compliance CMS 310µm/N
- Equivalent volume to the compliance VAS 52.2L
- Mechanical resistance RMS 1.09N·s/m
- Surround material Cloth
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 260mm
- Baffle cutout diameter 232mm
- Overall depth 110mm
- Volume occupied by the driver 1.73L
- Net weight 6.94kg
- Frame material Die-cast Aluminium
.png)
Export this driver to a simulation software:
Closed Box Simulator·





