Bass Guitar Speaker
Nominal diameter | 10″ / 254 mm |
Resonance | 55 Hz |
Q factor | 0.39 |
Sensitivity | 94.3 dB |
Linear excursion | ± 3 mm |
Program Power | 400 W |
Discontinued
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.3dB
- Frequency response 54 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 55Hz
- Mechanical quality factor QMS 7.67
- Electrical quality factor QES 0.41
- Total quality factor QTS 0.39
Large signal parameters
- Maximum linear excursion xmax 3mm
- Maximum excursion before damage xlim 7mm
- Air volume displaced at xmax VD 106cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.7Ω
- Inductance (1kHz) LE 0.49mH
- VC Diameter 51mm
- Winding material Copper
- Former material Kapton
Magnet
- Force factor Bl 9.72N/A
- Motor constant Bl/√RE 5.05N/√W
- Air gap height HAG 7.9mm
- Weight 1.077kg
- Material Ferrite
Diaphragm
- Effective diameter 211mm
- Effective area SD 350cm²
- Moving mass MMS 30g
- Moving mass (without air load) MMD 25.1g
- Material Paper
Suspensions
- Stiffness KMS 3.7N/mm
- Compliance CMS 270µm/N
- Equivalent volume to the compliance VAS 45.9L
- Mechanical resistance RMS 1.35N·s/m
- Surround material Cloth
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 267mm
- Baffle cutout diameter 229mm
- Overall depth 113mm
- Volume occupied by the driver 1.22L
- Net weight 3.99kg
- Frame material Die-cast aluminum
.png)
Export this driver to a simulation software:
Closed Box Simulator·





