Fane SOVEREIGN 15-300TC
8Ω
Full-range
Nominal diameter | 15″ / 381 mm |
Resonance | 48 Hz |
Q factor | 0.70 |
Sensitivity | 99.3 dB |
Linear excursion | ± 3.5 mm |
Program Power | 600 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 99.3dB
- Frequency response 50 - 15000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 48Hz
- Mechanical quality factor QMS 9.89
- Electrical quality factor QES 0.75
- Total quality factor QTS 0.70
Large signal parameters
- Maximum linear excursion xmax 3.5mm
- Air volume displaced at xmax VD 299cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.165mH
- VC Diameter 50.8mm
- Winding height HVC 9.4mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Flux density B 1.1T
- Force factor Bl 11N/A
- Motor constant Bl/√RE 4.82N/√W
- Air gap height HAG 8mm
- Weight 1.588kg
- Material Ferrite
Diaphragm
- Effective diameter 382mm
- Effective area SD 855cm²
- Moving mass MMS 56g
- Moving mass (without air load) MMD 38.9g
- Material Paper
Suspensions
- Stiffness KMS 5.1N/mm
- Compliance CMS 196µm/N
- Equivalent volume to the compliance VAS 203L
- Mechanical resistance RMS 1.71N·s/m
- Surround material Polyvinyl damped Poly Cotton
Dimensions
- Nominal diameter 15″
- 381mm
- Overall diameter 381mm
- Baffle cutout diameter 352mm
- Overall depth 162mm
- Flange thickness 9mm
- Mounting depth 153mm
- Volume occupied by the driver (estimated) 2.9L
- Net weight 5.0kg
- Frame material Pressed Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





