Fane SOVEREIGN PRO 12-500
8Ω
Woofer
| Nominal diameter | 12″ / 305 mm |
| Resonance | 43 Hz |
| Q factor | 0.31 |
| Sensitivity | 94.8 dB |
| Linear excursion | ± 6 mm |
| Program Power | 1000 W |
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.8dB
- Frequency response 45 - 4500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 43Hz
- Mechanical quality factor QMS 3.04
- Electrical quality factor QES 0.35
- Total quality factor QTS 0.31
Large signal parameters
- Maximum linear excursion (one way) xmax 6mm
- Air volume displaced at xmax VD 339cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 1.6mH
- VC Diameter 76.2mm
- Winding height HVC 18mm
- Winding material Copper Clad Aluminium
- Former material Glass Fibre
Magnet
- Flux density B 1.1T
- Force factor Bl 16N/A
- Motor constant Bl/√RE 6.76N/√W
- Air gap height HAG 10mm
- Weight 2.268kg
- Material Ferrite
Diaphragm
- Effective diameter 262mm
- Effective area SD 565cm²
- Moving mass MMS 58g
- Moving mass (without air load) MMD 48.7g
- Material Paper
Suspensions
- Stiffness KMS 4.24N/mm
- Compliance CMS 236µm/N
- Equivalent volume to the compliance VAS 107L
- Mechanical resistance RMS 5.15N·s/m
- Surround material Polyvinyl damped Poly Cotton
Dimensions
- Nominal diameter 12″
- 305mm
- Overall diameter 314mm
- Baffle cutout diameter 283mm
- Overall depth 145mm
- Flange thickness 9mm
- Mounting depth 136mm
- Volume occupied by the driver (estimated) 3.1L
- Net weight 7.5kg
- Frame material Die-cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.png.webp)
.png.webp)