FaitalPRO 10FE200 8Ω
4Ω
8Ω
Woofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 55 Hz |
| Q factor | 0.69 |
| Sensitivity | 93.5 dB |
| Linear excursion | ± 4.7 mm |
| Program Power | 300 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.5dB
- Frequency response 50 - 4500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 55Hz
- Mechanical quality factor QMS 11.30
- Electrical quality factor QES 0.74
- Total quality factor QTS 0.69
Large signal parameters
- Maximum linear excursion xmax 4.7mm
- Maximum excursion before damage xlim 10.4mm
- Air volume displaced at xmax VD 168cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.9Ω
- Inductance (1kHz) LE 0.42mH
- VC Diameter 37mm
- Winding height HVC 12mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1T
- Force factor Bl 8.2N/A
- Motor constant Bl/√RE 3.38N/√W
- Air gap height HAG 8mm
- Material Ferrite Ring
Diaphragm
- Effective diameter 214mm
- Effective area SD 360cm²
- Moving mass MMS 24.5g
- Moving mass (without air load) MMD 19.7g
Suspensions
- Stiffness KMS 2.94N/mm
- Compliance CMS 340µm/N
- Equivalent volume to the compliance VAS 61.7L
- Mechanical resistance RMS 0.7N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 257mm
- Baffle cutout diameter 234mm
- Overall depth 102mm
- Flange thickness 8mm
- Mounting depth 94mm
- Volume occupied by the driver 0.6L
- Net weight 2.2kg
- Frame material Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)