FaitalPRO 4FE42 8Ω
4Ω
8Ω
Full-range
Nominal diameter | 4″ / 100 mm |
Resonance | 110 Hz |
Q factor | 0.47 |
Sensitivity | 90.1 dB |
Linear excursion | ± 2.8 mm |
Program Power | 80 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 90.1dB
- Frequency response 100 - 20000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 110Hz
- Mechanical quality factor QMS 8.00
- Electrical quality factor QES 0.50
- Total quality factor QTS 0.47
Large signal parameters
- Maximum linear excursion xmax 2.8mm
- Maximum excursion before damage xlim 5.1mm
- Air volume displaced at xmax VD 14cm³
- Power handling P 40W
- Program power Pmax 80W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 0.07mH
- VC Diameter 25mm
- Winding height HVC 7mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.4T
- Force factor Bl 6N/A
- Motor constant Bl/√RE 2.58N/√W
- Air gap height HAG 4mm
- Material Neodymium Ring
Diaphragm
- Effective diameter 81mm
- Effective area SD 50.9cm²
- Moving mass MMS 4g
- Moving mass (without air load) MMD 3.7g
Suspensions
- Stiffness KMS 1.92N/mm
- Compliance CMS 520µm/N
- Equivalent volume to the compliance VAS 1.9L
- Mechanical resistance RMS 0.3N·s/m
Dimensions
- Nominal diameter 4″
- 100mm
- Overall size 101 x 130mm
- Baffle cutout diameter 92mm
- Overall depth 54mm
- Flange thickness 7mm
- Mounting depth 47mm
- Volume occupied by the driver 0.11L
- Net weight 0.39kg
- Frame material Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





