GRS A25-10
8Ω
Woofer
| Nominal diameter | 10″ / 254 mm |
| Resonance | 30 Hz |
| Q factor | 0.37 |
| Sensitivity | 89.2 dB |
| Linear excursion | ± 4.5 mm |
| Program power | 140 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89.2dB
- Frequency response 30 - 4500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 30Hz
- Mechanical quality factor QMS 2.50
- Electrical quality factor QES 0.43
- Total quality factor QTS 0.37
Large signal parameters
- Maximum linear excursion (one way) xmax 4.5mm
- Air volume displaced at xmax VD 156cm³
- Power handling P 70W
- Program power Pmax 140W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.6Ω
- Inductance (1kHz) LE 1.7mH
- VC Diameter 38mm
Magnet
- Force factor Bl 12N/A
- Motor constant Bl/√RE 4.67N/√W
Diaphragm
- Effective diameter 210mm
- Effective area SD 346cm²
- Moving mass (including air load) MMS 49.6g
- Moving mass MMD 45g
Suspensions
- Stiffness KMS 1.82N/mm
- Compliance CMS 550µm/N
- Equivalent volume to the compliance VAS 91L
- Mechanical resistance RMS 3.74N·s/m
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 254mm
- Baffle cutout diameter 244mm
- Overall depth 116mm
- Flange thickness 13mm
- Mounting depth 103mm
- Volume occupied by the driver (estimated) 1.4L
.webp)
.webp)
.webp)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion
.jpg.webp)
.jpg.webp)
.jpg.webp)
.jpg.webp)