Hertz Mille ML 1650.3 LEGEND
4Ω
Woofer
Nominal diameter | 6.5″ / 165 mm |
Resonance | 65 Hz |
Q factor | 0.52 |
Sensitivity | 89 dB |
Linear excursion | ± 5 mm |
Program Power | 250 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89dB
- Frequency response 40 - 7000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 65Hz
- Mechanical quality factor QMS 5.30
- Electrical quality factor QES 0.52
- Total quality factor QTS 0.52
Large signal parameters
- Maximum linear excursion xmax 5mm
- Maximum excursion before damage xlim 9mm
- Air volume displaced at xmax VD 70cm³
- Power handling P 125W
- Program power Pmax 250W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.3Ω
- Inductance (1kHz) LE 0.24mH
- VC Diameter 36mm
Magnet
- Force factor Bl 7N/A
- Motor constant Bl/√RE 3.85N/√W
- Diameter 80mm
- Height 5mm
- Material Neodymium
Diaphragm
- Effective diameter 132mm
- Effective area SD 140cm²
- Moving mass MMS 17.5g
- Moving mass (without air load) MMD 16.3g
- Material Pressed-pulp cone with cotton fibres
Suspensions
- Stiffness KMS 3.33N/mm
- Compliance CMS 300µm/N
- Equivalent volume to the compliance VAS 8.3L
- Mechanical resistance RMS 1.35N·s/m
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 165mm
- Baffle cutout diameter 141mm
- Overall depth 80mm
- Flange thickness 11mm
- Mounting depth 69mm
- Volume occupied by the driver (estimated) 0.45L
- Net weight 1.29kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





