MONACOR SP-6/150PA
8Ω
Mid-range
| Nominal diameter | 6.5″ / 170 mm |
| Resonance | 73 Hz |
| Q factor | 0.42 |
| Sensitivity | 90.2 dB |
| Linear excursion | ± 1 mm |
| Program Power | 300 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 90.2dB
- Frequency response 73 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 73Hz
- Mechanical quality factor QMS 5.31
- Electrical quality factor QES 0.46
- Total quality factor QTS 0.42
Large signal parameters
- Maximum linear excursion (one way) xmax 1mm
- Air volume displaced at xmax VD 14cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.5Ω
- Inductance (1kHz) LE 0.6mH
- VC Diameter 50mm
- Winding material Kapton
Magnet
- Force factor Bl 9.9N/A
- Motor constant Bl/√RE 3.88N/√W
- Diameter 120mm
- Weight 0.85kg
Diaphragm
- Effective diameter 133mm
- Effective area SD 139cm²
- Moving mass MMS 15.2g
- Moving mass (without air load) MMD 14g
Suspensions
- Stiffness KMS 3.23N/mm
- Compliance CMS 310µm/N
- Equivalent volume to the compliance VAS 8.5L
- Mechanical resistance RMS 1.31N·s/m
Dimensions
- Nominal diameter 6.5″
- 170mm
- Overall diameter 170mm
- Baffle cutout diameter 148mm
- Overall depth 86mm
- Flange thickness 7mm
- Mounting depth 79mm
- Volume occupied by the driver (estimated) 0.67L
- Net weight 2.16kg
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.png.webp)
.png.webp)